dpkg is the base command for handling Debian packages on the system. If you have .deb packages, it is dpkg that allows installation or analysis of their contents. But this program only has a partial view of the Debian universe: it knows what is installed on the system, and whatever it is given on the command line, but knows nothing of the other available packages. As such, it will fail if a dependency is not met. Tools such as apt and aptitude, on the contrary, will create a list of dependencies to install everything as automatically as possible.
dpkg is, above all, the tool for installing an already available Debian package (because it does not download anything). To do this, we use its -i or --install option.
Exemplu 5.2. Installation of a package with dpkg
#dpkg -i man-db_2.9.4-2_amd64.deb(Reading database ... 227466 files and directories currently installed.) Preparing to unpack man-db_2.9.4-2_amd64.deb ... Unpacking man-db (2.9.4-2) over (2.8.5-2) ... Setting up man-db (2.9.4-2) ... Updating database of manual pages ... man-db.service is a disabled or a static unit not running, not starting it. Processing triggers for mailcap (3.69) ...
dpkg; we know, thus, at what point any error may have occurred. The installation can also be effected in two stages: first unpacking, then configuration. apt takes advantage of this, limiting the number of calls to dpkg (since each call is costly, due to loading of the database in memory, especially the list of already installed files).
Exemplu 5.3. Separate unpacking and configuration
#dpkg --unpack man-db_2.9.4-2_amd64.deb(Reading database ... 227466 files and directories currently installed.) Preparing to unpack man-db_2.9.4-2_amd64.deb ... Unpacking man-db (2.9.4-2) over (2.9.4-2) ... Processing triggers for mailcap (3.69) ... #dpkg --configure man-dbSetting up man-db (2.9.4-2) ... Updating database of manual pages ... man-db.service is a disabled or a static unit not running, not starting it.
dpkg will fail to install a package and return an error; if the user orders it to ignore this, it will only issue a warning; it is for this reason that we have the different --force-* options. The dpkg --force-help command, or documentation of this command, will give a complete list of these options. The most frequent error, which you are bound to encounter sooner or later, is a file collision. When a package contains a file that is already installed by another package, dpkg will refuse to install it. The following messages will then appear:
Unpacking libgdm (from .../libgdm_3.8.3-2_amd64.deb) ...
dpkg: error processing /var/cache/apt/archives/libgdm_3.8.3-2_amd64.deb (--unpack):
trying to overwrite '/usr/bin/gdmflexiserver', which is also in package gdm3 3.4.1-9--force-overwrite, which tells dpkg to ignore this error and overwrite the file.
--force-* options, only --force-overwrite is likely to be used regularly. These options only exist for exceptional situations, rarely encountered in Debian Stable. It is better to leave them alone as much as possible in order to respect the rules imposed by the packaging mechanism. Do not forget, these rules ensure the consistency and stability of your system.
dpkg with the -r or --remove option, followed by the name of a package, removes that package. This removal is, however, not complete: all of the configuration files, maintainer scripts, log files (system logs) and other user data handled by the package remain. That way disabling the program is easily done by uninstalling it, and it is still possible to quickly reinstall it with the same configuration. To completely remove everything associated with a package, use the -P or --purge option, followed by the package name.
Exemplu 5.4. Removal and purge of the debian-cd package
#dpkg -r debian-cd(Reading database ... 228705 files and directories currently installed.) Removing debian-cd (3.1.35) ... #dpkg -P debian-cd(Reading database ... 228049 files and directories currently installed.) Purging configuration files for debian-cd (3.1.35) ...
dpkg options that query the internal database in order to obtain information. Giving first the long options and then corresponding short options (that will evidently take the same possible arguments) we cite
--listfiles package (or -L), which lists the files installed by this package;
--search file (or -S), which finds the package(s) containing the file;
--status package (or -s), which displays the headers of an installed package;
--list (or -l), which displays the list of packages known to the system and their installation status;
--contents file.deb (or -c), which lists the files in the Debian package specified;
--info file.deb (or -I), which displays the headers of this Debian package.
Exemplu 5.5. Various queries with dpkg
$dpkg -L base-passwd/. /usr /usr/sbin /usr/sbin/update-passwd /usr/share /usr/share/base-passwd /usr/share/base-passwd/group.master /usr/share/base-passwd/passwd.master /usr/share/doc /usr/share/doc/base-passwd /usr/share/doc/base-passwd/README /usr/share/doc/base-passwd/changelog.gz /usr/share/doc/base-passwd/copyright /usr/share/doc/base-passwd/users-and-groups.html /usr/share/doc/base-passwd/users-and-groups.txt.gz /usr/share/doc-base /usr/share/doc-base/users-and-groups /usr/share/lintian /usr/share/lintian/overrides /usr/share/lintian/overrides/base-passwd /usr/share/man /usr/share/man/de /usr/share/man/de/man8 /usr/share/man/de/man8/update-passwd.8.gz /usr/share/man/es /usr/share/man/es/man8 /usr/share/man/es/man8/update-passwd.8.gz /usr/share/man/fr /usr/share/man/fr/man8 /usr/share/man/fr/man8/update-passwd.8.gz /usr/share/man/ja /usr/share/man/ja/man8 /usr/share/man/ja/man8/update-passwd.8.gz /usr/share/man/man8 /usr/share/man/man8/update-passwd.8.gz /usr/share/man/pl /usr/share/man/pl/man8 /usr/share/man/pl/man8/update-passwd.8.gz /usr/share/man/ru /usr/share/man/ru/man8 /usr/share/man/ru/man8/update-passwd.8.gz $dpkg -S /bin/datecoreutils: /bin/date $dpkg -s coreutilsPackage: coreutils Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 17478 Maintainer: Michael Stone <[email protected]> Architecture: amd64 Multi-Arch: foreign Source: coreutils (8.32-4) Version: 8.32-4+b1 Pre-Depends: libacl1 (>= 2.2.23), libattr1 (>= 1:2.4.44), libc6 (>= 2.28), libgmp10, libselinux1 (>= 3.1~) Description: GNU core utilities This package contains the basic file, shell and text manipulation utilities which are expected to exist on every operating system. . Specifically, this package includes: arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp csplit cut date dd df dir dircolors dirname du echo env expand expr factor false flock fmt fold groups head hostid id install join link ln logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac tail tee test timeout touch tr true truncate tsort tty uname unexpand uniq unlink users vdir wc who whoami yes Homepage: http://gnu.org/software/coreutils $dpkg -l 'b*'Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-==========================-==============-============-================================== un backupninja <none> <none> (no description available) un backuppc <none> <none> (no description available) ii baloo-kf5 5.78.0-3 amd64 framework for searching and manag> un balsa <none> <none> (no description available) ii baobab 3.38.0-1 amd64 GNOME disk usage analyzer un base <none> <none> (no description available) un base-config <none> <none> (no description available) ii base-files 11.1 amd64 Debian base system miscellaneous > ii base-passwd 3.5.51 amd64 Debian base system master passwor> ii bash 5.1-2+b1 amd64 GNU Bourne Again SHell [..] $dpkg -c /var/cache/apt/archives/bash_5.1-3+b1_amd64.debdrwxr-xr-x root/root 0 2021-07-25 20:43 ./ drwxr-xr-x root/root 0 2021-07-25 20:43 ./bin/ -rwxr-xr-x root/root 1234376 2021-07-25 20:43 ./bin/bash drwxr-xr-x root/root 0 2021-07-25 20:43 ./etc/ -rw-r--r-- root/root 1994 2021-07-25 20:43 ./etc/bash.bashrc drwxr-xr-x root/root 0 2021-07-25 20:43 ./etc/skel/ -rw-r--r-- root/root 220 2021-07-25 20:43 ./etc/skel/.bash_logout -rw-r--r-- root/root 3526 2021-07-25 20:43 ./etc/skel/.bashrc -rw-r--r-- root/root 807 2021-07-25 20:43 ./etc/skel/.profile drwxr-xr-x root/root 0 2021-07-25 20:43 ./usr/ drwxr-xr-x root/root 0 2021-07-25 20:43 ./usr/bin/ -rwxr-xr-x root/root 6759 2021-07-25 20:43 ./usr/bin/bashbug -rwxr-xr-x root/root 14648 2021-07-25 20:43 ./usr/bin/clear_console drwxr-xr-x root/root 0 2021-07-25 20:43 ./usr/share/ drwxr-xr-x root/root 0 2021-07-25 20:43 ./usr/share/doc/ [..] $dpkg -I /var/cache/apt/archives/bash_5.1-3+b1_amd64.debnew Debian package, version 2.0. size 1416600 bytes: control archive=7256 bytes. 77 bytes, 4 lines conffiles 1030 bytes, 27 lines control 4511 bytes, 64 lines md5sums 603 bytes, 31 lines * postinst #!/bin/bash 500 bytes, 25 lines * postrm #!/bin/sh 14536 bytes, 33 lines * preinst 289 bytes, 22 lines * prerm #!/bin/bash Package: bash Source: bash (5.1-3) Version: 5.1-3+b1 Architecture: amd64 Essential: yes Maintainer: Matthias Klose <[email protected]> Installed-Size: 6470 Pre-Depends: libc6 (>= 2.25), libtinfo6 (>= 6) Depends: base-files (>= 2.1.12), debianutils (>= 2.15) Recommends: bash-completion (>= 20060301-0) Suggests: bash-doc Conflicts: bash-completion (<< 20060301-0) Replaces: bash-completion (<< 20060301-0), bash-doc (<= 2.05-1) Section: shells Priority: required Multi-Arch: foreign Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html Description: GNU Bourne Again SHell Bash is an sh-compatible command language interpreter that executes commands read from the standard input or from a file. Bash also incorporates useful features from the Korn and C shells (ksh and csh). . Bash is ultimately intended to be a conformant implementation of the IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2). . The Programmable Completion Code, by Ian Macdonald, is now found in the bash-completion package.
dpkg keeps a log of all of its actions in /var/log/dpkg.log. This log is extremely verbose, since it details every one of the stages through which packages handled by dpkg go. In addition to offering a way to track dpkg's behavior, it helps, above all, to keep a history of the development of the system: one can find the exact moment when each package has been installed or updated, and this information can be extremely useful in understanding a recent change in behavior. Additionally, all versions being recorded, it is easy to cross-check the information with the changelog.Debian.gz for packages in question, or even with online bug reports.
Architecture field in their control information. This field can contain either “all” (for packages that are architecture independent) or the name of the architecture that it targets (like “amd64”, “armhf”, …). In the latter case, by default, dpkg will only accept to install the package if its architecture matches the host's architecture as returned by dpkg --print-architecture.
dpkg's multi-arch support allows users to define “foreign architectures” that can be installed on the current system. This is simply done with dpkg --add-architecture like in the example below. There is a corresponding dpkg --remove-architecture to drop support of a foreign architecture, but it can only be used when no packages of this architecture remain.
#dpkg --print-architectureamd64 #dpkg --print-foreign-architectures#dpkg -i gcc-9-base_9.3.0-22_armhf.debdpkg: error processing archive gcc-9-base_9.3.0-22_armhf.deb (--install): package architecture (armhf) does not match system (amd64) Errors were encountered while processing: gcc-9-base_9.3.0-22_armhf.deb #dpkg --add-architecture armhf#dpkg --add-architecture armel#dpkg --print-foreign-architecturesarmhf armel #dpkg -i gcc-9-base_9.3.0-22_armhf.deb(Reading database ... 456367 files and directories currently installed.) Preparing to unpack gcc-9-base_9.3.0-22_armhf.deb ... Unpacking gcc-9-base:armhf (9.3.0-22) ... Setting up gcc-9-base:armhf (9.3.0-22) ... #dpkg --remove-architecture armhfdpkg: error: cannot remove architecture 'armhf' currently in use by the database #dpkg --remove-architecture armel#dpkg --print-foreign-architecturesarmhf
Multi-Arch: same” header field to tell the packaging system that the various architectures of the package can be safely co-installed (and that those packages can only satisfy dependencies of packages of the same architecture). The most important libraries have been converted since the introduction of multi-arch in Debian 7 Wheezy, but there are many libraries that will likely never be converted unless someone specifically requests it (through a bug report for example).
$dpkg -s gcc-9-basedpkg-query: error: --status needs a valid package name but 'gcc-9-base' is not: ambiguous package name 'gcc-9-base' with more than one installed instance Use --help for help about querying packages. $dpkg -s gcc-9-base:amd64 gcc-9-base:armhf | grep ^MultiMulti-Arch: same Multi-Arch: same $dpkg -L libgcc-s1:amd64 |grep .so/lib/x86_64-linux-gnu/libgcc_s.so.1 $dpkg -S /usr/share/doc/gcc-9-base/copyrightgcc-9-base:amd64, gcc-9-base:armhf: /usr/share/doc/gcc-9-base/copyright
Multi-Arch: same packages must have their names qualified with their architecture to be unambiguously identifiable. They also have the possibility to share files with other instances of the same package; dpkg ensures that all packages have bit-for-bit identical files when they are shared. Last but not least, all instances of a package must have the same version. They must thus be upgraded together.
Multi-Arch: foreign” or a package whose architecture matches the one of the package declaring the dependency (in this dependency resolution process, architecture-independent packages are assumed to be of the same architecture than the host). A dependency can also be weakened to allow any architecture to fulfill it, with the package:any syntax, but foreign packages can only satisfy such a dependency if they are marked “Multi-Arch: allowed”.